1989-Montero · auto tranny · страница 74 из 109 · Открыть оригинал PDF ↗
(6) Install the snap ring.
Check that the snap ring ends are not aligned with any of
the cutouts,
(7) Check the piston stroke of direct clutch as follows:
Install the direct clutch onto the center support. Using a dial
indicator, measure the stroke applying and. releasing the
compressed air (400 - 800 kPa, 4 - 8 kg/cm2, 58 - 116 psi)
as shown.
Standard piston stroke: 0.91-1.99 mm (.0358-.0783 in.)
If the stroke exceeds the limit, the clutch discs and/or
plates are probably worn. If the stroke is less than the limit,
parts may be misassembled or there may be excess ATF
on the discs.
Центральная опора
Оригинальная страница руководства
