1989-Montero · auto tranny · страница 75 из 109 · Открыть оригинал PDF ↗
DISASSEMBLY
(I) Remove the snap ring from the end of planetary sun gear
shaft.
(21 Pull the center support assembly from the planetary sun
gear.
(3) Remove the snap ring from the front of center support
assembly (No. 1 brake).
(41 Remove the flange, clutch disc and plate (No. 1 brake).
NOTE
Do not allow the removed clutch disc to dry out.
-
(51 Set the special tool on the spring retainer and compress the
springs with a shop press.
Using a screwdriver, remove the snap ring.
(61 Remove the spring retainer and twelve brake return
springs.
(7) Blow compressed air through the center support oil hole to
remove the No. 1 brake piston.
(8) Remove the No. 1 brake piston O-rings.
(9) Turn the center supportassembly over and remove the rear
snap ring (No. 2 brake).
(lOIRemove the flange, clutch discs and plates, (No. 2 brake).
NOTE
Do not allow the removed clutch discs to dry out.
.-
Оригинальная страница руководства
