1989-Mitsu-Factory Manual · Передняя подвеска · страница 2 из 66 · Открыть оригинал PDF ↗
Технические характеристики
Общие технические характеристики
| Items | 2.6L Engine | 3.OL Engine |
|---|---|---|
| Suspension system | Independent double wishbone with torsion bar and telescopic shock absorber | Independent double wishbone with torsion bar and telescopic shock absorber |
| Kingpin inclination angle | 8 | 8 |
| Torsion bar | ||
| Length x O.D. mm (in.) | ||
| 2door vehicles | 1,277.5 x 24.5 (50.295 x .965) | 1.277.5 x 23.5 (50.295 x -925) |
| 4-doer vehicles | 1.277.5 x 24.5 (50.295 x .965) | |
| Spring constant (wheel position | ||
| when body set) N/mm (tbs./in.) | ||
| 2door vehicles | 22 (123) | - |
| 4door vehicles | 22 (123) | |
| Torsion spnfg constant | ||
| Nm/deg (ft.lbs./deg) | ||
| 2door vehicles | 34.61 (25.03) | |
| 4door vehicles | - | |
| Shock absorber | ||
| Type | Hydraulic cylindrical doubleact- ing type | Hydraulic cylindrical double-act. ing type |
| Maximum length mm (in.) | 335 (13.19) | 335 (13.19) |
| Compressed length mm (in.) | 215 (8.46) | 215 (8.46) |
| Stroke mm (in.) | 120 (4.72) | 120 (4.72) |
| Damping force [at 0.3m/sec. | ||
| C.984 ft./set.)] | ||
| Expansion N (Ibs.) | 1,940-2,560 (428-564) | 1,940-2,560 (428-564) |
| Contraction N (Ibs.) | 900-I ,300 (198-287) | 900-l ,300 (198-287) |
| %ont axle hub bearing | ||
| Type | Tapered roller bearing | Tapered roller bearing |
| Dimensions (O.D. x I.D.) ‘mm (in.) | ||
| Outer | 73.431 x 45.242 (2.8910 x 1.7811) | 73.431 x 45.242 (2.8910 x 1.7811) |
| Inner | 73.431 x 45.242 (2.8910 x 1.7811) | 73.431 x 45.242 (2.8910 x 1.7811) |
| Irive shaft | ||
| Joint type Outer | B.J. (Birfield Joint) | B.J. (Birfield Joint) |
| Inner | D.O.J. (Double Offset Joint) | D.O.J. (Double Offset Joint) |
| Length (Joint to joint) mm (in.) | ||
| Left | ||
| Manual transmission | 267 (10.5) | 265.5 (10.45) |
| Automatic Transmission | 267 (10.5) | |
| Right | ||
| Manual transmission | 294 (11.6) | 283.5 (11.16) |
| Automatic Transmission | 294 (11.6) | |
| nner shaft | ||
| Shaft overall length mm (in.) | 432 (17.0) | 432 (17.0) |
| Bearing dimensions (O.D. x I.D.) mm (in.) | 62 x 35 (2.44 x 1.38) | 62 x 35 (2.44 x 1.38) |
Таблица в оригинале
Оригинальная страница руководства
