1989-Mitsu-Factory Manual · Передняя подвеска · страница 22 из 66 · Открыть оригинал PDF ↗
SERVICE POINTS OF REASSEMBLY
2. INSTALLATION OF OIL SEAL
(1) Apply the multipurpose grease to the oil seal lip and
inside surface of the front hub.
(2) Apply the multipurpose grease to the inner bearing
inner race and install the inner race into the front hub.
(3) Press-fit the new oil seal into the front hub by using
the special tools, until it is flush with the front hub end
face.
DISASSEMBLY AND REASSEMBLY (Free-Wheeling Hub)
Disassembly steps
1. Hub cover
2. O-ring
3. Housing
** 4. Housing C ring
MI 5. Brake (B)
6. Brake (A)
7. Brake spring
8. Housing snap ring
4* 9. Retainer (B) C ring
e* 10. Drive gear assembly
4* 11. Slide gear assembly
** ++ 12. Return spring
+a 13. Retainer (B)
14. Retainer bearing
15. Drive gear snap ring
16. Retainer (A)
17. Drive gear
+* 18. Slide gear C ring
19. Cam
20. Spring holder
21. Shift spring
22. Slide gear
NOTE
(1) Reverse the disassembly procedures to reassemble.
(2) (I+ : Refer to “Service Points of Disassembly”.
(3) I)+ : Refer to “Service Points of Reassembly”.
(4) m : Non-reusable parts
Оригинальная страница руководства
