1989-Mitsu-Factory Manual · Передняя подвеска · страница 46 из 66 · Открыть оригинал PDF ↗
(2) lnstell the B.J. boot,~ boot bands (new ones), and
D.O.J. boot on the drive shaft, in that order.
Boot bands A identification No. D.O.J. B.J.
2.6 L Engine, 3.0 L Engine (A,T) 20-75 20-110
1 3.0 L Engine (M/T) j 20-69 / 20-70 1
NOTE
Install the boot so that when it is tightened, its lever
may be located toward the rear of vehicle.
Caution
The B.J. and D.O.J. boots are different in size and
shape, so make sure they are correct.
(3) Apply all the specified grease, half of it to the inner
side of the B.J., and the other half to the inner side of
the B.J. boot.
Specified grease :
Repair kit grease
<2.6 L Engine> [I10 gr (3.9 oz.)]
<3.0 L Engine> [I30 gr (4.6 oz.))
(4) Secure the B.J. boot to the drive shaft by boot bands A
and B.
7. INSTALLATION OF D.O.J. CAGE / 9. D.0.J INNER RACE
(1) Install the D.O.J. cage onto the drive shaft so that the
smaller diameter side of the cage is installed first.
(2) Apply the specified grease to the D.O.J. inner race and
the D.O.J. cage, and then fit them together.
Specified grease : Repair kit grease
6. APPLICATION OF GREASE TO BALLS
Apply the specified grease to the ball insertion parts of the
D.O.J. inner race and D.O.J. cage, and insert the balls.
Specified grease : Repair kit grease
4. INSTALLATiON OF D.O.J. OUTER RACE
(I) Apply the specified grease to the D.O.J. outer race.
Specified-grease : -
Repair kii grease
<2.6 L Engine> 155 gr (1.9 oz.)]
<3.0 L Engine > 160 gr (2.3 oz.)]
(2) Fit the drive shaft into the D.0.J outer race.
(3) Add the specified grease to the D.O.J. outer race.
Specified grease :
Repair kit grease
<2.6 L Engine> [55 gr (1.9 oz.)]
(3.0 L Engine > [SO gr (2.3 oz.)]
Оригинальная страница руководства
