1987-Montero · Front susp a · страница 19 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL 1. REMOVAL OF COVER
NOZGBAB
(1) Place the free-wheeling hub in the free condition.
NOTE
The free condition can be obtained by shifting the
transfer shift lever to the 2H position and then moving
in reverse for 1 to 2 meters (3.3 to 6.5 ft.).
(2) Remove the automatic free-wheeling hub cover.
NOTE
When the cover cannot be loosened by hand, use an oil
filter wrench with a protective cloth in between not to
damage the cover.
2.
| REMOVAL OF SNAP RING Using a snap ring pliers, remove the drive shaft. | __ ,,#..f ,+. . sna$ ring | from | the | : : : .-..c r S&f; |
|---|
Таблица в оригинале
:
4. REMOVAL OF FRONT BRAKE ASSEMBLY
(1) Remove the front brake assembly with the brake hose’
connected.
(1) Remove the front brake assembly with the brake hose’ I .-
connected. 3 ;;: :
(2) Use wire to suspend the front brake assembly from thei,,,* .i
upper arm so that the front brake assembly won’t fall. Ai
.,- i 1: II- II-
Caution
Ai
.,- i 1: II- II-
I ._ 1
2.
Do not twist the brake hose.
5.
REMOVAL OF BOLTS
Remove tha automatic free-wheeling hub by using the
hexagonal wrench.
Оригинальная страница руководства
