1987-Montero · Front susp a · страница 20 из 83 · Открыть оригинал PDF ↗
9. REMOVAL OF LOCK NUT/IO. FRONT HUB ASSEMBLY
Проверка
N02GCAA
l Check the wheel bearing for seizure, discoloration and
rough raceway surface.
l Check the front hub -for cracks.
l Check the oil seals for cracks and damage.
SERVICE POINTS OF INSTALLATION N02GDAB
. AD.JUSTMENT OF WHEEL BEARING PRELOAD
(1) Using the special tool, tighten the lock nut by the
following procedures.
(2) Loosen the lock nut approximately 30 to 40 degrees to
adjust the front hub’s turning resistance and play in the
axial direction so that they agree with the standard
*
values.
Standard value : 30-130 Ncm .
(2.6-l 1.3 in.lbs.) .:. ,’
[Spring scale reading]
5-18 N (I.140 Ibs.)
Standard value : 0.05 mm (.0020 in.) or less
Оригинальная страница руководства
