1987-Montero · Front susp a · страница 67 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
2. REMOVAL OF DRIVE SHAFT
Refer to P.2-52.
4. REMOVAL OF INNER SHAFT
Attach the special tools to the flange of the shaft, and drive
the inner shaft out from the front differential carrier.
Caution
1. Being careful not to scratch or scar the shock
absorber with the special tool, remove the lower
mounting bolts of the shock absorber, and compress
the shock absorber as much as possible.
2. When pulling the inner shaft out from the front ,,’ I
differential carrier, be careful that the spline part of $
the inner shaft does not damage the oil seal. d
9. REMOVAL OF DIFFERENTIAL MOUNTING BRACKET:“:
(L.H.) / 13. DIFFERENTIAL MOUNTING BRACKET (R.H.)
;’
” :.
While supporting the differential carrier with a jack, remove
the differential mounting bracket.
NOTE
Support the differential carrier with a jack until installing
the differential mounting bracket.
Проверка
NOZUCAA
l Check the differential mounting bracket for deformation
and damage.
l Check the bracket for deformation and damage.
l Check the differential mounting rubber for cracks and
damage.
SERVICE POINTS OF INSTALLATION NOPUDAA , :’
l-r’
4. INSTALLATION INNER SHAFT p
4. INSTALLATION INNER SHAFT p
Drive the inner shaft into the front differential carrier b\l;.
using the special tools. j’ I ‘.+
1, .‘:
;;, ,yf
Caution
Be careful not to damage the lip of the dust seal and oil ;-i;i”.
seal.
2. INSTALLATION OF DRIVE SHAFT
Refer to P.2-52.
Оригинальная страница руководства
