1987-Montero · Front susp a · страница 63 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
NOZRBAB
2. REMOVAL OF FRONT HUB AND KNUCKLE ASSEM-
BLY/4. DRIVE SHAFT ASSEMBLY (R.H.)
Refer to 2-44, 52.
5. REMOVAL OF INNER SHAFT
Attach the special tools to the flange of the shaft, and drive
the inner shaft out from the front differential carrier.
, _.\
,‘C ’
Caution
1. Being careful not to scratch or scar the shocki’
absorber with the special tool, remove the lower a
mounting bolts of the shock absorber, and compress
the shock absorber as much as possible.
2. When pulling the inner shaft out from the front
differential carrier, be careful that the spline part of
the inner shaft does not damage the oil seal.
Проверка
NOZRCAA
l Check the inner shaft for bend.
l Check the bearing for wear or discoloration.
l Check the housing tube for cracks.
l Check the dust seal for cracks or damage.
SERVICE POINTS OF INSTALLATION NO2DAf <
I’.
5. INSTALLATION OF INNER SHAFT ,
Drive the inner shaft into the front differential carrier by ‘d
using the special tools. 7 1
Caution :.
1. Replace the circlip which is attached to the inner ”
shaft spline part with a new one.
2. Be careful not to damage the lip of the dust seal and
oil seal.
4. INSTALLATION OF DRIVE SHAFT ASSEMBLY (R.H.)/2.
FRONT HUB AND KNUCKLE ASSEMBLY
Refer to 2-44, 52.
Оригинальная страница руководства
