1987-Montero · Front susp a · страница 75 из 83 · Открыть оригинал PDF ↗
19. REMOVAL OF DRIVE PINION ASSEMBLY
(1) Make mating marks on the drive pinion and companion
flange.
Caution
The mating mark made on the companion flange
must not be on the coupling surface of the flange
yoke and the front propeller shaft.
(2) Drive out the drive pinion together with the drive pinion
spacer and drive pinion shims.
20. REMOVAL OF DRIVE PINION FRONT BEARING INNER RACE
I’
Pull out the drive pinion front bearing inner race by using
the special tools.
OF DRIVE PINION FRONT BEARING OUTER $’
:,
front bearing outer race from the ”
gear carrier by using the brass rod. 1.
29. REMOVAL
.z
RACE
Drive out the drive pinion front bearing outer race from the ”
gear carrier by using the brass rod.
INSPECTION
NOZVGAA
l Check the companion flange for wear or damage.
l Check the oil seal for wear or deterioration.
l Check the bearings for wear or discoloration.
l Check the gear carrier for cracks.
l Check the drive pinion and ring gear for wear or cracks.
l Check the side gears, pinion gears and pinion shaft for
wear or damage.
l Check the side gear spline for wear or damage.
1 STB Revision
Оригинальная страница руководства
