1987-Montero · Front susp a · страница 69 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
NOZVBAB
2. REMOVAL OF KNUCKLE AND DRIVE SHAFT ASSEMBLY
Refer to P.2-44, 52.
4. REMOVAL OF INNER SHAFT
Attach the special tools to the flange of the shaft, and pull
the inner shaft out from the front differential carrier.
Caution
+, ‘. . . .
p
1. Being careful not to scratch or scar the shock q
absorber with the special tool, remove the lower \
mounting bolts of the shock absorber, and compress *ll. L‘,
the shock absorber as much as possible.
2. When pulling the inner shaft out from the front ”
differential carrier, be careful that the spline part of
the inner shaft does not damage the oil seal.
6. REMOVAL OF FRONT PROPELLER SHAFT
Make the mating marks on the flange yoke and the
differential companion flange.
Detach the propeller shaft from the front differential carrier
assembly.
b’b”
,,r:' 1'
;:.” _:
‘.,
g,. .i,,:
8. REMOVAL OF DIFFERENTIAL MOUNTING BRACKET
(L.H.)
While supporting the differential carrier with a jack, removei’<
the differential mounting bracket.
*“I.‘.:‘{
“, 5. .)I’ ?->
‘:: < 5
i ‘,
INSPECTION BEFORE DISASSEMBLY
NOZVCAA
Remove the cover and gasket. Hold the working base in a vice,
and install the differential carrier assembly to the working
base.
Оригинальная страница руководства
