1987-Montero · Front susp a · страница 53 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
2. REMOVAL OF COVER (Automatic free wheeling hub)
(1) Place the free-wheeling hub in the free condition.
NOZOBAC
NOTE
The free condition can be obtained by shifting the
transfer shift lever to the .2H position and then moving
in reverse for 1 to 2 meters. (3.3 to 6.5 ft.)
(2) Remove the automatic free wheeling hub cover.
NOTE
When the cover cannot be loosened by hand, use an oil
filter wrench with a protective cloth in between not to ,jJ.,JJ,
3:
damage the cover. J
3. REMOVAL OF FREE WHEELING HUB COVER (Manual
free wheeling hub)
(1) Set the control handle to the FREE position.
(2) Remove the free wheeling hub cover.
>
,,.. ; y
9,
i9, ; j 5
c ,.:
~::
1.
I
:( ‘,I ”
.,, 1
‘h r%.
>-.
5. REMOVAL OF SNAP RING
Using a snap ring pliers, remove the snap ring from the’;
drive shaft.
7. REMOVAL OF FRONT BRAKE ASSEMBLY
(1) Remove the front brake assembly with the brake hose
connected.
(2) Use wire to suspend the front brake assembly from the
upper arm so that the front brake assembly won’t fall.
Caution
Do not twist the brake hose.
Оригинальная страница руководства
