1987-Montero · Front susp a · страница 42 из 83 · Открыть оригинал PDF ↗
- Lower Arm
REPLACEMENT OF LOWER ARM BUSHING NOZND~
1. Using a special tool, remove the bushing A from the
bracket.
NOTE
When removing the left hand bushing A, detach the
differential carrier. (Refer to P.2-69.)
2. Using a special tool, press-fit the bushing A into the
bracket.
3. Remove the bushing B from the lower arm by using
special tools.
4. Coat the bushing B and the lower arm with soap solution
and press-fit the bushing B into the lower arm by using
special tools and taking care not to twist or tilt the bushing
B.
NOl-E
Press-fit the bushing again from the opposite side to
equalize bushing projections at both ends.
REPLACEMENT OF LOWER BALL JOINT DUST
COVER
NOZNEAB
1. Apply the specified grease to the interior of the dust cover
and the lower ball joint.
Specified grease : Multipurpose grease SAE 5310, NLGI
No. 2
2. Apply the specified sealant to the grooves in the lower ball
joint.
Specified sealant : 3M ART Part No. 8663, No. 8661 or
equivalent
3. Secure the dust cover to the lower ball joint with a ring.
wision
I
Оригинальная страница руководства
