1987-Montero · Front susp a · страница 30 из 83 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
NOZGBBA
1. ‘REMOVAL OF FREE-WHEELING HUB COVER
(1) Set the control handle to the FREE position.
(2) Remove the free-wheeling hub cover.
3. REMOVAL OF SNAP RING
Using a snap ring pliers, remove the snap ring from the
drive shaft.
5. REMOVAL OF FRONT BRAKE ASSEMBLY
(1) Remove the front brake assembly with the brake hose
connected.
(2) Use wire to suspend the front brake assembly from the
upper arm so that the front brake assembly wont’t fall.
Caution
Do not twist the brake hose.
8. REMOVAL OF LOCK NUT/S. FRONT HUB ASSEMBLY
(1) After the lock washer has been removed, remove the
lock nut with the special tool.
(2) Remove the front hub assembly from the knuckle
together with the inner and outer bearings.
Проверка
NOZGCAA
l Check the wheel bearing for seizure, discoloration and
rough raceway surface.
l Check the front hub for cracks.
l Check the oil seal for cracks and damage.
Оригинальная страница руководства
