Pajero II Workshop Manual 1991 · FUEL · страница 17 из 339 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

FUEL GAUGE UNIT REPLACEMENT

FUEL GAUGE UNIT REPLACEMENTE13FDACT
(1) Takeoutthecarpetinthecargocompartmentand
remove the floor cover.

(2) Disconnect the connector from the fuel gauge unit, and
remove the fuel gauge unit:

(3) Install the fuel gauge unit so that the packing stoppers (2
places) match the hole in the fuel gauge unit

(4) Install thefloorcover packing and the floor cover.

2-WAY VALVE REPLACEMENT

E13FFAC1
(1)Removethefillerneckprotectorinsidethe leftrear
fender.

(2) Replace the 2-way valve

Caution

Be careful not to mistake the direction of the 2-way
valve:

(3) Install the filler neck protector.

Проверка работы топливного насоса

E13FGCE

(1)Usethemulti-usetester to force-drive the fuelpump;
and check the operation of the fuel pump.
(For inspection using themulti-use tester, refer toP.13-
28.)

(2) If the fuel pump does not operate, inspect by the follow-
ing procedure, and if the results are normal,then inspect
the drive circuit.

Turn the ignition switch to OFF_

When the fuelpump driveconnector isconnected
directly to the battery,check if the sound of the fuel
pump operation can be heard:

NOTE

As the fuel pump is a in-tank type, the fuel pump
sound is hardto hear,so remove the fuel tank cap
and checkfromthe tank inlet

Check if the fuel pressure can be felt by pinching the
high pressure fuel hose with fingertips.

Оригинальная страница руководства