Pajero II Workshop Manual 1991 · FUEL · страница 305 из 339 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Trouble symptom | Probable cause | Check chart No: | Remedy |
|---|---|---|---|
| The vehicle speed varies set greatly upward or downward. 'Hunching' (repeated alternating | Malfunction of the vehicle speed sensor circuit | No. | Repair the vehicle speed sensor system, Or replace the part: |
| acceleration and deceleration) occurs after setting is made | Malfunction of the speedometer cable or speedometer drive gear | ||
| Motor-driven vacuum pump circuit poor contact | No. | Repair the motor-driven vacuum pump or replace | |
| Malfunction of the motor-driven vacuum pump | the part: | ||
| Malfunction of the ECU | Replace the ECU. | ||
| The auto-cruise control system is not canceled when the brake pedal is depressed_ | Damaged or disconnected wiring of the stop lamp switch input circuit or stop lamp switch (for auto-cruise control) poor contact (short-circuit) | If the input check code No_ 23 indicates a malfunction, see the check chart No. | Repair the harness or replace the stop lamp switch. |
| Motor-driven vacuum pump drive circuit short-circuit | No. | Repair the harness replace the motor-driven vacuum pump: | |
| Malfunction of the ECU | Replace the ECU. | ||
| The auto-cruise control system is not canceled when the clutch pedal is depressed. <MT> (It is canceled, however, when the brake pedal is depressed: | Damaged or disconnected wiring of clutch switch input circuit Clutch switch improper installation (won't switch ON) | If the input check code 23 indicates No; a malfunction, see the check chart No. | Repair the harness, or repair or replace the clutch switch: |
| Malfunction of the ECU | Replace the ECU. | ||
| Tne ~cruise control system is auto- not canceled when the selector lever is moved to the position. <NT> (It is canceled, however, when the brake pedal is depressed, | Damaged wiring disconnected of inhibitor switch input circuit Improper adjustment of inhibitor switch | If the input check code No. 23 indicates a malfunction, see the check chart No. | Repair the harness, or repair or replace the inhibitor switch. |
| Malfunction of the ECU | Replace the ECU |
Оригинальная страница руководства
