Pajero II Workshop Manual 1991 · FUEL · страница 270 из 339 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
INJECTION SPRAY INSPECTION
Move the lever of the nozzle tester rapidly (4-6 times per
second) to eject the fuel continuously.Check that the
injection spray comes out evenly instraight, thin line
angle of spray is 10?The injection spray patterns shown
in the illustration at left are wrong:
(2) Check that no fuel drips after injection is completed.
(3) If there are any drips, disassemble the nozzle; clean it and
re-inspect, or replace the nozzle:
NOZZLE FUELTIGHT INSPECTION
(1) Gently raise the lever of the nozzle tester until the
pressure inside the nozzle becomes 12,749-13,729
kPa130-140 kg/cm?, 1,849-1,991 psi ).Check that
nofuel leaksfrom thenozzlewithin10
approx.
seconds_
(2)If there are any leaksdisassemble the nozzle, clean it
and re-inspect, or replace the nozzle.
PWJE9086-E
ADDED
Оригинальная страница руководства
