Pajero II Workshop Manual 1991 · FUEL · страница 279 из 339 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
SERVICE POINTS OF REMOVAL
8REMOVAL OF INJECTION PIPE
Loosen the nuts at the end of the injection pipe with the
corresponding holders (delivery holder for pump side ad
nozzle holder for nozzle side) retained by a spanner,etc .
9REMOVAL OF FUEL INJECTION PUMP
Align the notch of the crankshaft pulley with the "0" timing
mark t0 set the No.cylinder to the compression top dead
centre position:
NOTE
If the protrusion on the camshaft is pointing directly upwards
when the filler cap is removed, the No.cvlinder will be at
the compression top dead centre position:
SERVICE POINTS OF INSTALLATION
9_INSTALLATION OF INJECTION PUMP
Check that the No.cylinder is at the compression top
deadcentrepositionandaligningthenotchofthe
injection pump gear with themating mark on the
flange plate, and then install the injection pump to the
timing gear case_
8.INSTALLATION OF INJECTION PIPE
Tighten thenutsat theendof the injection pipe tothe
specifiedvaluewiththe correspondingholders (delivery
holderforpump side andnozzle holderfornozzle side)
retained by a spanner, etc .
PWJE9086-E
Оригинальная страница руководства
