Pajero II Workshop Manual 1991 · FUEL · страница 246 из 339 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Checking the Injection Condition

(1) Following the steps below,bleed out the residual pres-
sure within the fuel pipe line to prevent flow of the fuel.
(Refer to P.13-89.)

(2)Remove the injector.

3) Arrange the special tool (injector test set), adaptor, fuel
pressure regulator and clips as shown in the illustration
below.

4) Connect the battery's negative (~) terminal.
(5) Apply battery voltage to the fuel pump to the fuel pumpcheck terminal
and activate the fuel pump.

Stop the actuation of the injector, ad check for leakage
from the injector's nozzle.

Mitsubishi Motors CorporationFeb_1991

Оригинальная страница руководства