Pajero II Workshop Manual 1991 · FUEL · страница 67 из 339 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Checking the Injection Condition

(1)Following the steps below, bleedout the residual pres-
sure within the fuel pipe line to prevent flow of the fuel.
(Refer toP13-16.)

(2)Remove the injector

(3) Arrangethe special tool (injector test set) ,adaptor, fuel
pressure regulator and clips as shown in the illustration
below

Connect the battery's negativeterminal.
Apply battery voltagetothe fuel pump check terminal
and activate the fuel pump.

(6) Activate the injector and check the atomized spray condi-
tion of the fuel. The condition can be considered satisfac-
tory unless it is extremely poor

Stop the actuation of the injector, and check for leakage
from the injector's nozzle_

Standard value:drop or less per minute

(8) Activatetheinjectorwithout activatingthe fuelpump;
then, when the spray emission of fuel from the injector
stops.disconnectthespecial tool andrestoreit toits
original condition:

Оригинальная страница руководства