MANUALS · FUEL [13] · страница 102 из 340 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICE ADJUSTMENTPROCEDURES
ACCELERATOR CABLE INSPECTION ANDAD-
JUSTMENTVEHICLESWITHOUTAUTO-
CRUISE CONTROL SYSTEM>E13FCAZ3

Refer to P.13-14

For models equipped with the auto-cruise control system,
refer to P.13-188.

FUEL FILTER REPLACEMENT

E13FZAM

Refer to P13-14,

FUEL GAUGE UNIT REPLACEMENT

E13FDAD

Refer to P.13-15.

2-WAY VALVE REPLACEMENT

E13FFAD

Refer to P.13-15.

FUEL PUMP OPERATION CHECK

E13FGCF

Refer to P.13-15.

How TO REDUCE THE FUEL LINE INTERNAL
PRESSURE

E13HABH

Refer to P.13-16.

Очистка дроссельного узла и заслонки

(1)Start the engine and warm it up until the temperature of
the engine coolant reaches 80%C (1769F) or higher; then
stop the engine_

Disconnect the air intake hose at the throttle body side_
Plugthe bypass intake port inlet in the throttle body:
Caution

Never Iet cleaning liquid get into the bypass intake:

Spray cleaning liquid (from the intake port of the throttle
body) onto the valve, and then leave as is for about five
minutes

Start the engine and race it a few times; then let it run at
idle speed for about one minute_

NOTE

The engine idling speedbecomesunstable(orthe
engine stalls) if the by-pass passage is plugged, (or the
engine stalls),let the engine run with the throttle valve
slightly open_

Оригинальная страница руководства