MANUALS · FUEL [13] · страница 270 из 340 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

INJECTION SPRAY INSPECTION

(1)Move the lever of the nozzle tester rapidly (4-6 times pe
second) to eject the fuel continuously.Check that the
injection spray comes out evenly ina straight,thin line
angle of spray is 109The injection spray patterns showr
in the illustration at left are wrong:

2) Check that no fuel drips after injection is completed.

3) If there are any drips, disassemble the nozzle, clean it and
re-inspect, or replace the nozzle

NOZZLE FUELTIGHT INSPECTION

(1) Gently raise the lever of the nozzle tester until the
pressure inside the nozzle becomes 12,749-13,729
kPa (130-140 kg/cm?1,849-1,991psi ).Check that
no fuelleaks fromthe nozzlewithin10
approx
seconds

(2) If there are any leaks, disassemble the nozzle, clean it
and re-inspect, or replace the nozzle

Mitsubishi Motors CorporationDec . 1993

Оригинальная страница руководства